噴鋅施工工藝：是工件的單單從表面補救后，噴鋅機采用低端電壓將2根不間斷送進的鋅絲冰化，同樣以壓縮視頻大氣為運轉將鋅絲塑料顆粒快速路噴射到工件外層外層以超過防蝕效果。要根據加工過程規范來決定噴鋅的厚度度，如何鋅層打算厚點噴鋅頭能能走慢點，也可不停來回多噴多久，假若鋅層我想要薄點噴鋅頭就可以走快一點，一半平常操控它的板厚在40~60納米，噴灑于間距200~300mm,粉末噴涂高效率在50~80m2/H,所用鋅絲約0.1~0.2KG/m2，鋅絲內直徑2mm,.鋅絲利潤約在5~8元兩者/每平方和。噴鋅機電功率為13.2KW,,運行開關電源380V 50HZ 輸出的瞬時電流是400A 氧氣減壓閥經濟壓力0.5MPa 耗氣量2立米/每秒鐘。空油壓機用15KW上面的。

整體一般來說，噴鋅前噴砂是為了能夠洗滌產品工件表皮加入零部件外表粗造度，使鋅粉在金屬材料外表支承力更強，延長了鑄件防銹應用年限，使工件外在漂亮觀。準確地說噴鋅加工施工新工藝離不用噴砂加工施工新工藝。倆個加工施工新工藝結合起來，組成一兩個防污過程！